Power indicator

Powered on the, the indicator light will be red, no power it won’t light up.

P0 buzzer jump cap

The jumper cap IObit is plugged in by default. In the Makecode, you can use the music column to program, and make a sound. Usually, there is no sound when you power on.

3Pin IO port leads

All the pins in the have been taken out without any reservation (PS: there is no P17 and P18, not the IObit is not taken out)

40P Horizontal Socket

Compact size socket

Board mounting holes and fixing holes

The outermost two holes are approximately 4.8 mm in diameter and are compatible with Lego friction pins with a spacing of 48 mm.

The innermost two holes are about 3.1mm in diameter and can be tightened with ordinary M3 screws. The spacing is about 32mm.

• Size: 5.7*3.7*2 cm
• Thickness of PCB: 1.6mm
• Miniature buzzer: 1
• Output current: 40MaH
• Working voltage: 5V