Sale!
3UF7000-1AU00-0 For Sale
$4,514.25
3UF7000-1AU00-0
Basic Unit SIMOCODE pro C, PROFIBUS DP Interface 12 Mbit/s, RS 485, 4I/3O Freely Parameterizable, Us: 110…240 V AC/DC, Input for Thermistor Connection Monostable Relay Outputs
Basic unit SIMOCODE pro C
Specifications
| Basic unit SIMOCODE pro C, PROFIBUS DP interface 12 Mbit/s, RS 485, 4I/3O freely parameterizable, Us: 110…240 V AC/DC, input for thermistor connection Monostable relay outputs | ||
| product brand name | SIRIUS | |
| product designation | Motor management system | |
| design of the product | basic unit 1 | |
| product type designation | SIMOCODE pro C | |
| General technical data | ||
| product function | ||
| ● bus communication | Yes | |
| ● data acquisition function | Yes | |
| ● diagnostics function | Yes | |
| ● password protection | Yes | |
| ● test function | Yes | |
| ● maintenance function | Yes | |
| product component | ||
| ● input for thermistor connection | Yes | |
| ● digital input | Yes | |
| ● input for analog temperature sensors | No | |
| ● input for ground fault detection | No | |
| ● relay output | Yes | |
| product extension | ||
| ● temperature monitoring module | No | |
| ● current measuring module | Yes | |
| ● current/voltage measuring module | No | |
| ● fail-safe digital I/O module | No | |
| ● ground-fault monitoring module | No | |
| ● control unit with display | No | |
| ● control unit | Yes | |
| ● analog I/O module | No | |
| apparent power consumption | 5.3 VA | |
| consumed active power | 2.9 W | |
| insulation voltage with degree of pollution 3 at AC rated value | 300 V | |
| surge voltage resistance rated value | 4 000 V | |
| protection class IP | IP20 | |
| shock resistance | ||
| ● according to IEC 60068-2-27 | 15g / 11 ms | |
| ● vibration resistance | 1-6 Hz / 15 mm; 6-500 Hz / 2 g | |
| switching capacity current of the NO contacts of the relay outputs at AC-15 | ||
| ● at 24 V | 6 A | |
| ● at 120 V | 6 A | |
| ● at 230 V | 3 A | |
| switching capacity current of the NO contacts of the relay outputs at DC-13 | ||
| ● at 24 V | 2 A | |
| ● at 60 V | 0.55 A | |
| ● at 125 V | 0.25 A | |
| mechanical service life (switching cycles) typical | 10 000 000 | |
| electrical endurance (switching cycles) typical | 100 000 | |
| buffering time in the event of power failure | 0.05 s | |
| reference code according to IEC 81346-2 | F | |
| continuous current of the NO contacts of the relay outputs | ||
| ● at 50 °C | 6 A | |
| ● at 60 °C | 5 A | |
| type of input characteristic | Type 1 in accordance with EN 61131-2 | |
| Substance Prohibitance (Date) | 05/01/2012 | |
| certificate of suitability | ||
| ● according to ATEX directive 2014/34/EU | BVS 06 ATEX F001 | |
| explosion device group and category according to ATEX directive 2014/34/EU | II (2) G, II (2 ) D, I (M2) | |
| Electromagnetic compatibility | ||
| EMC emitted interference according to IEC 60947-1 | class A | |
| EMC immunity according to IEC 60947-1 | corresponds to degree of severity 3 | |
| conducted interference | ||
| ● due to burst according to IEC 61000-4-4 | 2 kV (power ports) / 1 kV (signal ports) | |
| ● due to conductor-earth surge according to IEC 61000-4-5 | 2 kV | |
| ● due to conductor-conductor surge according to IEC 61000-4-5 | 1 kV | |
| ● due to high-frequency radiation according to IEC 61000-4-6 | 10 V | |
| field-based interference according to IEC 61000-4-3 | 10 V/m | |
| electrostatic discharge according to IEC 61000-4-2 | 6 kV contact discharge / 8 kV air discharge | |
| conducted HF interference emissions according to CISPR11 | corresponds to degree of severity A | |
| field-bound HF interference emission according to CISPR11 | corresponds to degree of severity A | |
| Inputs/ Outputs | ||
| product function | ||
| ● parameterizable inputs | Yes | |
| ● parameterizable outputs | Yes | |
| number of inputs | 4 | |
| ● for thermistor connection | 1 | |
| number of digital inputs with a common reference potential | 4 | |
| digital input version type 1 acc. to IEC 61131 | Yes | |
| input voltage at digital input at DC rated value | 24 V | |
| number of outputs | 3 | |
| number of semiconductor outputs | 0 | |
| number of outputs as contact-affected switching element | 3 | |
| switching behavior | monostable | |
| type of relay outputs | Monostable | |
| wire length for digital signals maximum | 300 m | |
| wire length for thermistor connection | ||
| ● with conductor cross-section = 0.5 mm² maximum | 50 m | |
| ● with conductor cross-section = 1.5 mm² maximum | 150 m | |
| ● with conductor cross-section = 2.5 mm² maximum | 250 m | |
| Protective and monitoring functions | ||
| product function | ||
| ● asymmetry detection | Yes | |
| ● blocking current evaluation | Yes | |
| ● power factor monitoring | No | |
| ● ground fault detection | Yes | |
| ● phase failure detection | Yes | |
| ● phase sequence recognition | No | |
| ● voltage detection | No | |
| ● monitoring of number of start operations | Yes | |
| ● overvoltage detection | No | |
| ● overcurrent detection 1 phase | Yes | |
| ● undervoltage detection | No | |
| ● undercurrent detection 1 phase | Yes | |
| ● active power monitoring | No | |
| product function | ||
| ● current detection | Yes | |
| ● overload protection | Yes | |
| ● evaluation of thermistor motor protection | Yes | |
| total cold resistance number of sensors in series maximum | 1.5 kΩ | |
| response value of thermoresistor | 3 400 … 3 800 Ω | |
| ● of the short-circuit control | 9 Ω | |
| release value of thermoresistor | 1 500 … 1 650 Ω | |
| Motor control functions | ||
| product function | ||
| ● parameterizable overload relay | Yes | |
| ● circuit breaker control | Yes | |
| ● direct start | Yes | |
| ● reverse starting | Yes | |
| ● star-delta circuit | No | |
| ● star-delta reversing circuit | No | |
| ● Dahlander circuit | No | |
| ● Dahlander reversing circuit | No | |
| ● pole-changing switch circuit | No | |
| ● pole-changing switch reversing circuit | No | |
| ● slide control | No | |
| ● valve control | No | |
| Communication/ Protocol | ||
| ● protocol is supported PROFIBUS DP protocol | Yes | |
| ● protocol is supported PROFINET IO protocol | No | |
| ● protocol is supported PROFIsafe protocol | No | |
| ● protocol is supported Modbus RTU | No | |
| ● protocol is supported EtherNet/IP | No | |
| ● protocol is supported OPC UA Server | No | |
| ● protocol is supported LLDP | No | |
| ● protocol is supported Address Resolution Protocol (ARP) | No | |
| ● protocol is supported SNMP | No | |
| ● protocol is supported HTTPS | No | |
| ● protocol is supported NTP | No | |
| ● protocol is supported Media Redundancy Protocol (MRP) | No | |
| ● product function is supported Device Level Ring (DLR) | No | |
| number of interfaces | ||
| ● according to PROFINET | 0 | |
| ● according to PROFIBUS | 1 | |
| ● according to Ethernet/IP | 0 | |
| product function | ||
| ● web server | No | |
| ● shared device | No | |
| ● at the Ethernet interface Autocrossover | No | |
| ● at the Ethernet interface Autonegotiation | No | |
| ● at the Ethernet interface Autosensing | No | |
| ● is supported PROFINET system redundancy | No | |
| ● supports PROFIenergy measured values | No | |
| ● supports PROFIenergy shutdown | No | |
| transfer rate maximum | 12 Mbit/s | |
| identification & maintenance function | ||
| ● I&M0 – device-specific information | Yes | |
| ● I&M1 – higher level designation/location designation | Yes | |
| ● I&M2 – installation date | Yes | |
| ● I&M3 – comment | Yes | |
| type of electrical connection of the communication interface | 9-pin SUB-D socket (12 Mbit) / screw terminal (1.5 Mbit) | |
| Installation/ mounting/ dimensions | ||
| mounting position | any | |
| fastening method | screw and snap-on mounting | |
| height | 111 mm | |
| width | 45 mm | |
| depth | 95 mm | |
| required spacing | ||
| ● top | 40 mm | |
| ● bottom | 40 mm | |
| ● left | 0 mm | |
| ● right | 0 mm | |
| Connections/ Terminals | ||
| product component removable terminal for auxiliary and control circuit | Yes | |
| type of connectable conductor cross-sections | ||
| ● solid | 1x (0.5 … 4.0 mm²), 2x (0.5 … 2.5 mm²) | |
| ● finely stranded with core end processing | 1x (0.5 … 2.5 mm²), 2x (0.5 … 1.5 mm²) | |
| ● at AWG cables solid | 1x (20 … 12), 2x (20 … 14) | |
| ● at AWG cables stranded | 1x (20 … 14), 2x (20 … 16) | |
| tightening torque with screw-type terminals | 0.8 … 1.2 N·m | |
| tightening torque [lbf·in] with screw-type terminals | 7 … 10.3 lbf·in | |
| type of connectable conductor cross-sections for PROFIBUS wire | 2x 0.34 mm², AWG 22 | |
| Ambient conditions | ||
| installation altitude at height above sea level | ||
| ● 1 maximum | 2 000 m | |
| ● 2 maximum | 3 000 m; max. +50 °C (no protective separation) | |
| ● 3 maximum | 4 000 m; max. +40 °C (no protective separation) | |
| ambient temperature | ||
| ● during operation | -25 … +60 °C | |
| ● during storage | -40 … +80 °C | |
| ● during transport | -40 … +80 °C | |
| environmental category | ||
| ● during operation according to IEC 60721 | 3K6 (no formation of ice, no condensation, relative humidity 10 … 95%), 3C3 (no salt mist), 3S2 (sand must not get into the devices), 3M6 | |
| ● during storage according to IEC 60721 | 1K6 (no condensation, relative humidity 10 … 95%), 1C2 (no salt mist), 1S2 (sand must not get into the devices), 1M4 | |
| ● during transport according to IEC 60721 | 2K2, 2C1, 2S1, 2M2 | |
| relative humidity | ||
| ● during operation | 5 … 95 % | |
| contact rating of auxiliary contacts according to UL | B300 / R300 | |
| Short-circuit protection | ||
| design of short-circuit protection per output | Fuse links: gG 6 A, quick-response 10 A (IEC 60947-5-1), miniature circuit-breaker C char.: 1.6 A (IEC 60947-5-1) or 6 A (I_K < 500 A) | |
| Safety related data | ||
| touch protection against electrical shock | finger-safe | |
| Galvanic isolation | ||
| (electrically) protective separation according to IEC 60947-1 | All circuits with protective separation (double creepage paths and clearances), the information in the “Protective Separation” test report, No. A0258, must be observed (link see further information) | |
| Control circuit/ Control | ||
| product function soft starter control | No | |
| type of voltage of the control supply voltage | AC/DC | |
| control supply voltage at AC | ||
| ● at 50 Hz rated value | 110 … 240 V | |
| ● at 60 Hz rated value | 110 … 240 V | |
| control supply voltage frequency | ||
| ● 1 rated value | 50 Hz | |
| ● 2 rated value | 60 Hz | |
| relative symmetrical tolerance of the control supply voltage frequency | 5 % | |
| control supply voltage at DC | ||
| ● rated value | 110 … 240 V | |
| operating range factor control supply voltage rated value at DC | ||
| ● initial value | 0.85 | |
| ● full-scale value | 1.1 | |
| operating range factor control supply voltage rated value at AC at 50 Hz | ||
| ● initial value | 0.85 | |
| ● full-scale value | 1.1 | |
| operating range factor control supply voltage rated value at AC at 60 Hz | ||
| ● initial value | 0.85 | |
| ● full-scale value | 1.1 | |
| inrush current peak | ||
| ● at 240 V | 3 A | |
| duration of inrush current peak | ||
| ● at 240 V | 1 ms | |
Downloads
- Datasheet – 3UF7000-1AU00-0
Additional Information
| Device | SIRIUS |
Related products
Sale!
Cable Lugs, Terminals \u0026 Splices
$4,506.20
Sale!
Cable Lugs, Terminals \u0026 Splices
$81.96
Sale!
Cable Lugs, Terminals \u0026 Splices
$2.29
Sale!
Cable Lugs, Terminals \u0026 Splices
$2.93
Sale!
Cable Lugs, Terminals \u0026 Splices
$6,263.97
Sale!
Cable Lugs, Terminals \u0026 Splices
$194.35
Sale!
Cable Lugs, Terminals \u0026 Splices
$0.40
Sale!
Cable Lugs, Terminals \u0026 Splices
$2,044.90