• Water, dust and chemical resistant
• Seven step smart charge algorithm
• Recovery of fully discharged ‘dead’ batteries
• Automatic power supply function
• Severe cold performance: down to -30°C
• Several other battery life enhancing features
• Low power mode to charge smaller batteries
• Li-ion battery mode
• Setup and configure, readout of voltage and current by Bluetooth Smart

• Blue Smart IP65 Charger : 6 V/12 V – 1.1 A
• Input voltage and frequency range : 100 – 250VAC
• Efficiency : 82%
• Standby power consumption : <0,5 W
• Minimum battery voltage : Starts charging from down to 0 V
• Charge voltage ‘absorption’
  • Normal: 7,2 V | 14,4 V
  • High: 7,35 V | 14,7 V
  • Li-ion: 7,1 V | 14,2 V
• Charge voltage ‘float’
  • Normal: 14,4 V
  • High: 14,7 V
  • Li-ion: 14,2 V
• Normal: 28,8 V
  • High: 29,4 V
  • Li-ion: 28,4 V
• Charge voltage ‘storage’
• Normal: 6,6 V | 13,2 V
• High: 6,6 V | 13,2 V
• Li-ion: 6,75 V | 13,5 V
• Charge current : 1.1 A 
• Low current mode : 0,5A
• Temperature compensation (lead-acid batteries only) 8 mV/°C | 16 mV/°C
• Powersupply mode : Yes
• Back current drain : 0,1 Ah/month (140uA)
• Protection : Reverse polarity, Output short circuit, Over temperature
• Operating temp. range : -30 to +50°C (full rated output up to 30°C)
• Humidity (non-condensing) : Max 95%
• Charge algorithm : 7-stage adaptive
• Bluetooth : -4dBm, 2402 – 2480 MHz

ENCLOSURE

• Battery-connection : Black and red cable of 1,5 meter
• 230V AC-connection : 1.5m cable with CEE 7/16 or AS/NZS 3112 plug
• Protection category : IP65 (splash and dust proof)
• Weight : 0,4 kg
• Dimensions (h x w x d) : 38 x 64 x 153 mm

1. Datasheet – BATT CHGR 6/12V 1.1A IP65 VICTRO