Operation:

• Firstly remove the yellow plastic token& replace the coin to the clamp.
• If use RMB 1. please switch (SW3) to RMB Only
• Choose N.O(Normal Open) or N.C(Normal Close) in coordination with the machine specification. (Normally Mario Machines should be N.C, Gaming Machines be N.O )
• Switch to “SW2”:
  • Fast: 25ms/short pulse signal (apply to Mario Machine)
  • Medium: 50ms/medium pulse signal (apply to different machine)
  • Slow: 100ms/long pulse signal (apply to entertainment machine)
  • Notice: If coin-eating , please adjust the switch.
• VR turning for sensitivity of coin acceptance: turn clockwise (+)for strict coin selecting: anti-clockwise(-)for slack.
• Lines guide of connector:
• Gray line
  • Red line DC+12V
  • White line COIN Signal
  • Black line Ground
  • Gray line

• Rating voltage: DC+12V with 20percent discrepancy
• Stand by Current: 50mA-55mA
• Operating Current: 310mA-340mA
• Accepted coin diameter: 22mm-28mm
• Accepted coin thickness: 1.2mm-3.0mm
• Size per unit: W 15.3 x D6.5 x H13(mm)

1. Datasheet – CMU MULTI COIN ACCEPTOR-PROGRMBL